Determination of technological parameters of culinary products production using mixtures and emulsions for additive technologies

The article presents the results of research on the determination of rational technological parameters for the production of culinary products using dry mixtures and emulsions based on animal raw materials for additive technologies. It was found that when making products using mixtures and emulsions based on broiler chicken meat, as well as a combination of broiler chicken meat and pork, pork and beef (ratio 1:1) rational height of the layer, which makes it possible to ensure stability and safety of the product shape (with a fixed diameter of the opening of the culinary syringe – 7 mm and the optimal length of the layer - 100 mm), is from 14–21 mm (with a layer width of 7 mm) and up to 133–154 mm (with a layer width of 98 mm), which allows for improved structural and mechanical (SSL – 1090.7–1099.9 Pa) and functional and technological indicators of these products (WHC – 92.7–97.5%). The rational sequence of application and the duration of chopping of the main and auxiliary raw materials for the manufacture of emulsions, the duration of preparation (3 minutes), the degree of hydration (1:2 – 1:3) and the temperature of water for the reduction of dry mixtures (60±1° C) were established, which made it possible to develop technological schemes for the production of culinary products using additive technologies.

1. Kolmykova, O.N. Nauchno-tehnicheskij progress kak faktor povyshenija urovnja zhizni naselenija [Scientific and technological progress as a factor in improving the living standards of the population] / O.N. Kolmykova, T.V. Kudrjavceva // Social'nojekonomicheskie javlenija i processy. – 2011. – № 5–6. – S. 127–129.

2. Morozov, A.V. Perspektivy razvitija innovacionnogo tehnologicheskogo uklada [Prospects for the development of an innovative technological order] / A.V. Morozov, P.P. Nizamov // Vestnik Kazanskogo tehnologicheskogo universiteta. — 2013. – №20. – S. 331–334.

3. Zubkov, A. Tret'ja promyshlennaja revoljucija [Third industrial revolution] [Jelektronnyj resurs]. – 2019. – Rezhim dostupa: https://www.dipaul.ru/pressroom/tretyapromyshlennaya-revolyutsiya/. – Data dostupa. – 14.02.2020.

4. Ermakov, A.I. Primenenie 3D-printera dlja formovanija izdelij iz shokolada [Using a 3D printer to mold chocolate products] / A.I. Ermakov, [i dr.] // Mirovaja jekonomika i biznesadministrirovanie malyh i srednih predprijatij: materialy 13-go mezhdunar. nauch. seminara, provodimogo v ramkah 15-j mezhd. Nauchnotehnicheskoj konferencii «Nauka, obrazovanie – proizvodstvu, jekonomike, Minsk, 26-28 janvarja 2016 g. / BNTU; redkol.: B.M. Hrustalev [i dr.]. – Minsk, 2016. – S. 42–43.

5. Grishin, A.S. Novye tehnologii v industrii pitanija – 3D-pechat' [New technologies in the food industry - 3D printing] / A.S. Grishin [i dr.] // Vestnik JuUrGU. Serija «Pishhevye biotehnologii». – 2016.–T.4. – №2. – S. 36–44.

6. Ermakov, A.I. Razrabotka konstrukcii 3Dprintera, pechatajushhego pishhevymi materialami [Development of the design of a food-grade 3D printer] / A.I. Ermakov, S.V. Chajko // Mirovaja jekonomika i biznes-administrirovanie malyh i srednih predprijatij: materialy 13-go mezhdunar. nauch. seminara, provodimogo v ramkah 15-j mezhd. Nauchno-tehnicheskoj konferencii «Nauka, obrazovanie proizvodstvu, jekonomike, Minsk, 26-28 janvarja 2017 g. / BNTU; redkol.: B.M. Hrustalev [i dr.]. – Minsk, 2017. – S. 255– 256.

7. Krucheneckij, V.Z. K ispol'zovaniju trehmernoj pechati pishhevyh produktov, odezhdy [To the use of three-dimensional printing of food, clothing] / V.Z. Krucheneckij [i dr.] // Vestnik Almatinskogo tehnologicheskogo universiteta. – 2016. – №3 (112). – S. 18–25.

8. Poteha, V.L. Additivnye tehnologii v pishhevoj otrasli [Additive technologies in the food industry] / V.L. Poteha, A.V. Poteha // Innovacionnye tehnologii v pishhevoj promyshlennosti : materialy HV Mezhdunar. nauch.-prakt. konf., Minsk, 5–6 okt. 2016 g. : v 2 ch. / Nac. akad. nauk Belarusi, Nauch.-prakt. centr Nac. akad. nauk Belarusi po prodovol'stviju ; red.: V. G. Gusakov [i dr.]. – Minsk, 2016. – Ch. 1. – S. 9–10.

9. Shvarcev, S.L. Est' li budushhee u additivnyh tehnologij? [Is there a future for additive technologies?] / S.L. Shvarcev // Vestnik Rossijskoj akademii nauk. Serija «Diskussionnaja tribuna». – 2017. – T.87, №6.–S.538–547.

10. Shokoladnye figurki v Belarusi [Chocolate figurines in Belarus] [Jelektronnyj resurs]. – 2019. – Rezhim dostupa: http.pulscen.by. price/400802— shokoladnye—figurk. – Data dostupa: 21.01.2020.

11. 3d printer, pechatajushhij shokoladom [3d printer printing chocolate] [Jelektronnyj resurs]. – 2019. – Rezhim dostupa: http: chocolader. hlml. – Data dostupa: 23.01.2020.

12. Zaiko, A.F. Ispol'zovanie ZD-printera na vystavke [Using a 3D printer at the exhibition] / Zaiko A.F., Chajko S.V. / Materialy 71-j nauchnotehnicheskoj konferencii Belorusskogo nacional'nogo tehnicheskogo universiteta. – Minsk, 2015. – S. 314–315.

13. Ermakov, A.I. Primenenie additivnyh tehnologij pri formovanii izdelij iz shokolada [The use of additive technologies in the molding of chocolate products] / Ermakov A.I., Chajko SV., Markin K.V. / Sovremennye tehnologii sel'skohozjajstvennogo proizvodstva: sbornik nauchnyh statej po materialam XIX Mezhdunarodnoj nauchnoprakticheskoj konferencii. – Grodno, 2016. – s. 246–247.